GRE- EPOXY INDUSTRIAL – GEOTHERMAL PIPES

TETI – FPI

GRE EPOXY PIPES

Systems Used:
Clean Water System | Hot Water System | Heater System | Air Transfer System | Gas Transfer System

According to this specification, the pipes, fittings are classified according to ASTM D 2310 standard, designating type, quality, class and long time compressive strength. For pressures of 12,5 bar and above, the axial load bearing class of the pipe will be RTRP-11FX1, class RTRP-11-FU1 for 8 bar. Pipes will be in their natural colors without pigments, inserts and colorants. No risk of corrosion. The resin used should be a bisphenol-A epoxy resin with an approximate Epoxy Equivalent Weight of ~ 185 (eg Epicote 828, DER 331 or equivalent), unchanged raw material. The resin / curing agent mixture must have chemical and mechanical resistance to withstand the forces exerted. At a temperature of -20 / +110 degrees, at the pressure of 5 bar / 50 bar, at the diameter range of 50 mm / 4000 mm, the closest expansion to the steel will provide the possibility to select flame propagation. Production metrics will be in metric / European measurement system and norms.

Common Uses

In transferring clean water
Hot water transfer
In geothermal transfers
In the transfer of liquid oils
In transfers of foodstuffs
In oil transfer
In gas transfer

Product Features and Selection Alternatives

Type	Diameter Range ( mm )	Pressure Range ( bar )	Temperature ( °C )
GRP Pipes	80 – 4000	up to 25 bar	up to 60 °C
GRV Pipes	80 – 4000	up to 25 bar	up to 82 °C
GRE Pipes	25 – 1600	up to 50 bar	up to 110 °C
GRE Pipes – Yüksek Basınç	50 – 450	up to 240 bar	up to 110 °C
Wavistrong H2O Water Serie	4000 -up to	up to 25 bar	up to 110 °C
SRC Pipes	25 – 100	up to 150 bar	up to 99 °C
UPVC Pipes	12 – 315	up to 16 bar	up to 20 °C
Polietilen PE Pipes	16 – 250	up to 20 bar	up to 20 °C
Glass Reinforced Tanks	4000 -up to	up to 68000 L	up to 65 °C
Cement Pipes	300 – 2400
Fiber Cement Pipes	50 – 1800
Rubber Seals	4000 -up to